Job Vacancy in Dubai Electricity & Water Authority

Urgently Required!!!

We PT Millenium Muda Mandiri is a recruitment and consulting company that specializes in placement of Indonesian skilled workers in Hospitality (Hotel, Cruise Line & Restaurant), Healthcare & Medical, Oil & Gas, Construction, and Retail Industry through out the Gulf region, Far East Asia, Europe and still expanding fast to other parts of the world.

Our Client from Dubai Electricity & Water Authority (DEWA) is looking for Professional Candidates Engineer to fill the following vacancies in Dubai :
1. Manager–Electrical Maintenance

QUALIFICATIONS:
Post Graduate / Graduate in Electrical Engineering
· Minimum 15 years experience in maintenance of electrical equipment in an electrical power plant / industry for a graduate and 8 years for a post graduate, of which at least 4 years should be in a similar responsible position.
· Shall be responsible for proactive & reliability centered maintenance of electrical equipment and systems installed in a modern GT/ST power and desalination plant.
· Should be able to plan & schedule all maintenance activities with cost effective inventory management and prepare & control budgetary provisions.
· Good co-coordinating, organizing, planning & communication skills are required.
· Should have in depth knowledge of all electrical equipment of a power plant, sequence controls & protections and exposure to Quality, Safety & Environment Management Systems, Root Cause Analysis & computer-aided maintenance techniques.

2. Foreman- Electrical Maintenance

QUALIFICATIONS:
Diploma in Electrical Engineering
· Minimum 7 years hands on experience in maintenance of electrical equipment in power stations or process industry.
· Shall be able to supervise, guide and execute routine, breakdown and overhaul maintenance jobs of electrical equipment like Generators, Transformers, LV/HV Motors, Switchgear, EOT Cranes, Batteries, Chargers & Inverters and etc. Knowledge of sequence controls, wiring, schematic drawings & safe work procedures is required.

3. Engineer/ Senior Engineer–Electrical Maintenance

QUALIFICATIONS:
Post Graduate / Graduate in Electrical Engineering
· Minimum 12 years experience in maintenance of electrical equipment in an electrical power plant / industry for a graduate and 8 years for a post graduate, of which at least 4 years should be in a similar responsible position.
· Shall be responsible for proactive & reliability centered maintenance of electrical equipment and systems installed in a modern GT/ST power and desalination plant.
· Should be able to plan & schedule all maintenance activities with cost effective inventory management and prepare & control budgetary provisions.
· Good co-coordinating, organizing, planning & communication skills are required.
· Should have in depth knowledge of all electrical equipment of a power plant, sequence controls & protections and exposure to Quality, Safety & Environment Management Systems, Root Cause Analysis & computer-aided maintenance techniques.

4. Assistant Engineer- Electrical Maintenance

QUALIFICATIONS:
Post Graduate / Graduate in Electrical Engineering
· Minimum 5 years for graduate & 3 years for postgraduate candidate having experience of maintenance of electrical equipment in an electrical power plant or process industry.
· Shall be responsible for supervising reliability- centered maintenance of equipments like Generators, Transformers, HV & LV motors, switchgears, EOT Cranes, Batteries and Chargers & Inverters.
· Good co-coordinating and communication skills are required. A very good computer cognizance is preferred.

5. SENIOR POWER STATION OPERATOR

QUALIFICATIONS:
Degree / Diploma in Engineering (Mech./Elect. /Power)
· AGE – Not more than 35 years
· Minimum 2 – 5 years experience in operation of a modern gas/thermal power & desalination station.
· The applicant shall be well versed in power / desalination plant operations through DCS system.
· Responsible for monitoring and operating the plant / equipment from the central control boards and optimize plant operation.
· Responsible for satisfactory operation of the assigned plant (Boiler, Turbine, Generator and Desalination Plant) with the appointed crew.
· Supervise, instruct and co-ordinate with the assigned crew efficiency and effectively fulfill their job functions and assignments.
· Check and review the operating conditions and records in order to investigate the weak and troublesome point in advance of any occurrence.
· Maintain the operating equipment and facilities in sound and clean condition.
· Maintain detailed operation logs for all operation activities.
· Carry out isolation of the equipment for planned and emergency maintenance and normalization of the plant thereafter.
· Follow safety rules and ensure close adherence to the safety, environment and quality requirements. Should be willing to work in shifts

6. POWER STATION OPERATOR

QUALIFICATIONS:
· Degree / Diploma in Engineering (Mech./Elect. /Power)
· AGE – Not more than 30 years
· Minimum 2 – 5 years experience in operation of a modern gas/thermal power & desalination station.
· The applicant shall be well versed in power / desalination plant operations through DCS system.
· Responsible for monitoring and operating the plant / equipment from the central control boards and optimize plant operation.
· Responsible for satisfactory operation of the assigned plant (Boiler, Turbine, Generator and Desalination Plant) with the appointed crew. Supervise, instruct and co-ordinate with the assigned crew efficiency and effectively fulfill their job functions and assignments.
· Check and review the operating conditions and records in order to investigate the weak and troublesome point in advance of any occurrence.
· Maintain the operating equipment and facilities in sound and clean condition.

· Maintain detailed operation logs for all operation activities.

· Carry out isolation of the equipment for planned and emergency maintenance and normalization of the plant thereafter.

· Follow safety rules and ensure close adherence to the safety, environment and quality requirements. Should be willing to work in shifts.





7. SENIOR ENGINEER - I&C MAINT.



QUALIFICATIONS:

B.Sc in Electrical / Electronics / Instrument Engineer

· 5 – 10 years experience in diagnostic check, troubleshooting and maintenance of instrumentation and control in Power plant.

· Through understanding of Control Loops.

· Field instruments and Control Actuator, Calibration and Maintenance, Knowledge and working experience on different control system such as DCS, PLC, Fire Fighting System.

· Practical experience in ABB PROCONTROL P-13 / P–14 / PMS & POS, GE –-Speedtronic Mark – VI, ABB DCS – INFI – 90 / Symphony, Siemens DCS- Teleperm – ME / Teleperm – XP, Simadyn – D Controller, Toshiba DCS TOSMAP, PLC SIAMTIC –S5 / S7, CEGELEC PLC, Allen bardley PLC, HIMA PLC.

· Fire fighting and detection system Minimax / Simplex capability.

· Self motivated, ability to work under pressure, good supervisory and reporting correspondences.

· Awareness of personnel and equipment safety standard, Environmental protection standard and Quality management system.





8. ENGINEER - I&C MAINT.



QUALIFICATIONS:

B.Sc in Electrical / Electronics / Instrument Engineer

· 5 – 10 years experience in diagnostic check, troubleshooting and maintenance of instrumentation and control in Power plant.

· Through understanding of Control Loops.

· Field instruments and Control Actuator, Calibration and Maintenance, Knowledge and working experience on different control system such as DCS, PLC, Fire Fighting System.

· Practical experience in ABB PROCONTROL P-13 / P–14 / PMS & POS, GE –-Speedtronic Mark – VI, ABB DCS – INFI – 90 / Symphony, Siemens DCS- Teleperm – ME / Teleperm – XP, Simadyn – D Controller, Toshiba DCS TOSMAP, PLC SIAMTIC –S5 / S7, CEGELEC PLC, Allen bardley PLC, HIMA PLC.

· Fire fighting and detection system Minimax / Simplex capability.

· Self motivated, ability to work under pressure, good supervisory and reporting correspondences.

· Awareness of personnel and equipment safety standard, Environmental protection standard and Quality management system.





9. ASSISTANT ENGINEER - I&C MAINT.



QUALIFICATIONS:

B.Sc in Electrical / Electronics / Instrument Engineer

· 5 – 10 years experience in diagnostic check, troubleshooting and maintenance of instrumentation and control in Power plant.

· Through understanding of Control Loops.

· Field instruments and Control Actuator, Calibration and Maintenance, Knowledge and working experience on different control system such as DCS, PLC, Fire Fighting System.

· Practical experience in ABB PROCONTROL P-13 / P–14 / PMS & POS, GE –-Speedtronic Mark – VI, ABB DCS – INFI – 90 / Symphony, Siemens DCS- Teleperm – ME / Teleperm – XP, Simadyn – D Controller, Toshiba DCS TOSMAP, PLC SIAMTIC –S5 / S7, CEGELEC PLC, Allen bardley PLC, HIMA PLC. Fire fighting and detection system Minimax / Simplex capability.

· Self motivated, ability to work under pressure, good supervisory and reporting correspondences.

· Awareness of personnel and equipment safety standard, Environmental protection standard and Quality management system.





10. I&C FOREMAN



QUALIFICATIONS:

Diploma in Electronics, Instrumentation & Control or Electrical Engineer

· Minimum 7 years experience in Power and Desalination Plant Instrumentation & Control System.

· Carry out of the repair and maintenance work of all types of field instruments such as temperature, pressure, level, vibration, speed, flame detectors, transmitters, switches, gauges, recorders and analyzers.

· Calibration and maintenance of various types of control actuators e.g. Hydraulic, pneumatic and motorized control valves.

· Work experience of various types of workshop test equipment.

· Supervision ability and guidance of work crafts and reporting capability. Self motivated and can work under pressure.

· Should have awareness of personnel and equipment safety such as PLC, DCS and through understanding of control loops.




11. SR. Engineer Mechanical Maintenance (Steam Turbine)



QUALIFICATIONS:

Diploma in Electronics, Instrumentation & Control or Electrical Engineer

· Minimum 7 years experience in Power and Desalination Plant Instrumentation & Control System.

· Carry out of the repair and maintenance work of all types of field instruments such as temperature, pressure, level, vibration, speed, flame detectors, transmitters, switches, gauges, recorders and analyzers.

· Calibration and maintenance of various types of control actuators e.g. Hydraulic, pneumatic and motorized control valves.

· Work experience of various types of workshop test equipment.

· Supervision ability and guidance of work crafts and reporting capability. Self motivated and can work under pressure.

· Should have awareness of personnel and equipment safety such as PLC, DCS and through understanding of control loops.


12. Engineer Mechanical Maintenance (Steam Turbine)

QUALIFICATIONS

Degree in Mechanical Engineering.

· Candidate must have minimum 10-12 years experience in a large Power Station.

· Must have worked as a Maintenance Engineer involving routine, preventive and breakdown maintenance of a Medium and heavy duty Steam Turbines, Back pressure steam turbines, power pumps, NG gas compressor etc.

· Should be well experienced in the overhaul/Major/ Minor inspections of Steam Turbines and its auxiliaries.

· Should-have- capability of effectively plan, Monitor overhauls schedule to achieve high-reliability and efficiency of the plant.

· Should have experience in troubleshooting of the equipment malfunctions and finalize short term/ long-term corrective actions.

· Should have adequate writing/communicati on skills to prepare reports, tender specifications, contract documents etc.

· Shall be responsible for preparation of maintenance budget, control and effective utilization of the same.

· Should have experience in spare parts planning, purchase and inspection activities.

· Should have good knowledge of computerized Maintenance management system.

· Should have good knowledge of Safety, OHSAS and ISO standards.




13. SR. Engineer Mechanical Maintenance (Boiler)

QUALIFICATIONS

Degree in Mechanical Engineering.

· Candidate must have minimum 10-12 years experience in a large Power Station.

· Must have worked as a Maintenance Engineer involving routine, preventive and breakdown maintenance of a High pressure Boilers, Heat recovery boilers( NG/LFO firing),High pressure valves, Control valves, Safety Valves, High Pressure piping ,Drum , Burner duct, Diverter Damper ,Boiler tubes /header etc..

· Should be well experienced in the overhaul/Major inspection and trouble shooting of Power /Heat recovery boilers and it's auxiliaries.

· Should-have- capability of effectively plans. Monitor overhauls schedule to achieve high-reliability and efficiency of the plant.

· Should have experience in high pressure welding and NDT test applicable in Boiler Tubes and headers.

· Should have adequate writing/communicati on skills to prepare reports, tender specifications, contract documents maintenance budget, control and effective utilization of the same.

· Having knowledge of standards and practices applicable to Boiler plant equipments will be added advantage.

· Should have good knowledge of computerized Maintenance Management system Safety, OHSAS and ISO standards etc.



14. Engineer Mechanical Maintenance (Boiler)

QUALIFICATIONS

Degree in Mechanical Engineering.

· Candidate must have minimum 10-12 years experience in a large Power Station.

· Must have worked as a Maintenance Engineer involving routine, preventive and breakdown maintenance of a High pressure Boilers, Heat recovery boilers( NG/LFO firing),High pressure valves, Control valves, Safety Valves, High Pressure piping ,Drum , Burner duct, Diverter Damper ,Boiler tubes /header etc.

· Should be well experienced in the overhaul/Major inspection and trouble shooting of Power /Heat recovery boilers and its auxiliaries.

· Should-have- capability of effectively plans.

· Monitor overhauls schedule to achieve high-reliability and efficiency of the plant.

· Should have experience in high pressure welding and NDT test applicable in Boiler Tubes and headers.

· Should have adequate writing/communicati on skills to prepare reports, tender specifications, contract documents maintenance budget, control and effective utilization of the same.

· Having knowledge of standards and practices applicable to Boiler plant equipments will be added advantage.

· Should have good knowledge of computerized Maintenance Management system Safety, OHSAS and ISO standards etc.




15. SR. Engineer Mechanical Maintenance (Gas Turbine)

QUALIFICATIONS

Degree in Mechanical Engineering

· Candidate must have minimum 10-12 years experience in a large Power Station.

· Must have worked as a Maintenance Engineer involving routine, preventive and breakdown maintenance of a Gas Turbines and its auxiliaries. (Preferably Siemens/General Electric Gas Turbines)

· Should be well experienced in the overhaul/Major/ Minor/Annual inspection of Gas Turbines and Its auxiliaries.

· Should-have- capability of effectively plan, Monitor overhauls schedule to achieve high-reliability and efficiency of the plant.

· Should have experience in troubleshooting of the equipment malfunctions and finalize short term/ long-term corrective actions.

· Should have adequate writing/communicati on skills to prepare reports, tender specifications, contract documents etc.

· Responsible for preparation of maintenance budget, control and effective utilization of the same.

· Should have experience in spare parts planning, purchase and inspection activities.

· Should have good knowledge of computerized Maintenance management system.

· Should have good knowledge of Safety, OHSAS and ISO standards.

· Shall be a capable of managing Major/minor overhauls and routine maintenance effectively.



16. Engineer Mechanical Maintenance (Gas Turbine)

QUALIFICATIONS

Degree in Mechanical Engineering.

· Candidate must have minimum 10-12 years experience in a large Power Station. He

· Must have worked as a Maintenance Engineer involving routine, preventive and breakdown maintenance of a Gas Turbines and its auxiliaries. (Preferably Siemens/General Electric Gas Turbines)

· Should be well experienced in the overhaul/Major/ Minor/Annual inspection of Gas Turbines and Its auxiliaries.

· Should-have- capability of effectively plan, Monitor overhauls schedule to achieve high-reliability and efficiency of the plant.

· Should have experience in troubleshooting of the equipment malfunctions and finalize short term/ long-term corrective actions.

· Should have adequate writing/communicati on skills to prepare reports, tender specifications, contract documents etc.

· Responsible for preparation of maintenance budget, control and effective utilization of the same.

· Should have experience in spare parts planning, purchase and inspection activities.

· Should have good knowledge of computerized Maintenance management system.

· Should have good knowledge of Safety, OHSAS and ISO standards.

· Shall be a capable of managing Major/minor overhauls and routine maintenance effectively.



17. SR. Engineer Mechanical Maintenance (Desalination)

QUALIFICATIONS

Degree in Mechanical Engineering.

· Candidate must have minimum 10-12 years experience in a large Power Station.

· Must have worked as a Maintenance Engineer involving routine, preventive and breakdown maintenance of a of the Desalination plant of MSF technology, including sea water system, DM water plant, verticals pumps ( BBD/BRP,SEA WATER pumps).

· Should-have- capability of effectively plan, Monitor overhauls/Annual schedule to achieve high-reliability and efficiency of the Desalination plants.

· Should have experience in troubleshooting of the equipment malfunctions and finalize short term/ long-term corrective actions.

· Knowledge of Corrosion technology, including selection of material for different application will have added advantage.

· Should have adequate writing/communicati on skills to prepare reports, tender specifications, contract documents etc.

· Responsible for preparation of maintenance budget, control and its effective utilization of it.

· Must have a good knowledge of standards and practices applicable to Desalination plant equipments.

· Should have experience in spare parts planning, purchase, inspection activities, computerized Maintenance management system, Safety, OHSAS and ISO standards.




18. Engineer Mechanical Maintenance (Desalination)

QUALIFICATIONS

Degree in Mechanical Engineering.

· Candidate must have minimum 10-12 years experience in a large Power Station.

· Must have worked as a Maintenance Engineer involving routine, preventive and breakdown maintenance of a of the Desalination plant of MSF technology, including sea water system, DM water plant, verticals pumps ( BBD/BRP,SEA WATER pumps).

· Should-have- capability of effectively plan, Monitor overhauls/Annual schedule to achieve high-reliability and efficiency of the Desalination plants.

· Should have experience in troubleshooting of the equipment malfunctions and finalize short term/ long-term corrective actions. Knowledge of Corrosion technology, including selection of material for different application will have added advantage.

· Should have adequate writing/communicati on skills to prepare reports, tender specifications, contract documents etc.

· Responsible for preparation of maintenance budget, control and its effective utilization of it. Suitable candidate must have a good knowledge of standards and practices applicable to Desalination plant equipments. Should have experience in spare parts planning, purchase, inspection activities, computerized Maintenance management system , Safety, OHSAS and ISO standards.





19. Asst. Engineer (Mechanical Maintenace)



QUALIFICATIONS

Degree in Mechanical Engineering

· 6-8 years experience for degree/Diploma holders.

· Should have worked in a large Power Station of large Petrochemical, Fertilizer factory as a Maintenance Engineer responsible for routine, preventive and breakdown maintenance of a large Power Steam/Gas Turbines, Boilers, and Large Pumps etc.

· Should have experience in overhaul Major Inspection of Steam or Gas Turbines.

· Should have capability to effectively plan, schedule, and supervise work with highest reliability and productivity.

· Should have experience in troubleshooting equipment malfunctions and select corrective actions.

· Should have adequate writing skills to prepare reports and written documents- shall have a good knowledge of standards and practices applicable to power plant equipment

· Should have experience in spare parts planning, purchase and inspection activities.

· Should have knowledge in using computerized Maintenance management system effectively over and above good computer use experience.

· Shall ensure good safety practices in work.

20. Foreman(Mechanical Maintenace)

QUALIFICATIONS

Diploma in Mechanical Engineering.
· 6-8 years experience in a large power station or similar field like refinery, petrochemical or fertilizer plant.
· Shall have experience in overhaul or major inspection of a large Steam / Gas Turbines, pumps, compressors, boilers, high pressure valves, etc. S
· Shall have knowledge of international standards on material and machinery fit standard, tolerances.
· Shall have basic knowledge of ND tests. Shall have experience in planning, scheduling and execution overhaul work.
· Shall have leadership qualities to lead a team of professional technicians for timely and quality work execution.
· Should have experience in computer use for data entry and analysis using a maintenance management system software
· Shall have experience in Pipeline fabrication and or overhaul of large vertical and multistage pumps.
· Should have good experience with renowned maintenance / refurbishment contractors
· Should be safety conscious.

21. Senior Mechanic

QUALIFICATIONS

Higher Secondary School Certificate followed by Trade School Certificate- Apprenticeship / on job training in power station or continuous process Industry.
· Minimum 8 years experience in maintenance and overhaul of large Steam Turbines and / or Major Inspection of Industrial Gas Turbines.
· Have experience in Overhaul of Large vertical pumps, Power boilers, Multi stage high-pressure pumps etc.
· Capable of independently handling the work allocated to him on overhaul of the equipment referred to above.
· Shall have a fair knowledge of the rigging of parts of large machines and various measuring instruments and precision tools.
· Shall have capability to align turbine to generator.
· Shall be able to read and understand machine drawings and should be familiar with fits and tolerances in assembly of machinery.
· Should be able to converse English language.

General skills and qualifications required:
- Male, Age between 30 – 45 years old.
- Must have excellent spoken and written in English, other language is highly desirable.
- Working Reference and Computer literate
- A self starter, energetic, good personality, highly motivated and inspirational
- Have excellent communication skills
- Ability to work independently and good team work.

SERIOUS CANDIDATES MEETING ABOVE CRITERIA AND WITH VALID PASSPORT, WILLING TO SUBMIT IT ONCE SHORTLISTED FOR INTERVIEW NEED ONLY APPLY IMMEDIATELY.

WALK-IN INTERVIEW or Please send the necessary documents at the earliest before August 14, 2009 to:

HRD & GA Division
Menara Hijau, 14th Floor SUITE # 1406
Jl. MT Haryono Kav. 33
Jakarta 12700
Email. admin1@milleniummud amandiri. com

Peluang Bisnis Untuk Anda :